”Typically, people gather to drum in drum ‘circles’ with others from the surrounding community. The drum circle offers equality because there is no head or tail. It includes people of all ages. The main objective is to share rhythm and get in tune with each other and themselves. To form a group consciousness. To entrain and resonate. By entrainment, I mean that a new voice, a collective voice, emerges from the group as they drum together.”
I recently joined a group of mostly old guys who meet a couple of weekends a year to experience nature and the great outdoors. We all come from a diverse cut in society yet we all get along so well. One reason is we Continue reading →
For some sailors, there is a common maintenance ritual that occurs every spring—repairing cracks where the leading edge of the ballast keel meets the hull. This annually reoccurring crack is sometimes referred to as a “Catalina Smile” because it often occurs on Catalina sailboats.
The crack can form due to a number of causes but probably the most common reason is the hull isn’t as stiff as when it was new. Continue reading →
Surcease is a late ’50s International Flying Dutchman Class sailboat. The Mahogany hull was cold-molded in Holland and imported by Paul Rimoldi of Miami Florida. Mr Rimoldi made everything else, including many pieces of hardware. He raced the boat on Biscayne Bay into the ’60s and sailed it for many years. He rebuilt the boat in the late ’80s but died before he finished. We bought the boat in August 1992 from his widow and sailed it for almost a season before we discovered that the hull was in very poor condition; the Urea-resin glue between the veneers had begun to turn to dust. We stored the boat and bought another Flying Dutchman. Continue reading →
When mixing larger batches of resin and hardener, pot life— or the amount of time that elapses before the epoxy hardens in the container—is very important. You need to estimate how much mixed epoxy you will use in a certain amount of time. Variables that affect this calculation include temperature, volume, surface area, hardener speed, the insulating quality of the substrate the epoxy is exposed to, and any fillers used. Continue reading →
This stand-up paddleboard, commonly called a SUP, was lovingly handcrafted by Joe Pakkala. His attention to detail is impressive in the herringbone inlays and the non-skid foot pads incorporated into the epoxy’s finish. As opposed to traditional adhesive non-skid pads, incorporating the nonskid into the epoxy allows you to have a safe place to stand without covering the beauty of a natural wood finish.
Last Father’s Day I received a new light and sleek bicycle from my family. It is by far the nicest bike I’ve ever owned. I enjoy riding it to work in the spring, summer and fall. Because it is so nice, I decided I didn’t want to bolt on the aluminum bracket used previously over the back wheel on my old bike. The bracket had served multiple purposes. It supported my travel bag and it acted as a fender to keep road water off my back while riding. I decided I would ride with a backpack instead to reduce bulkiness and thought it would be nice to make a lightweight fender that I could snap on for those rainy days. That would allow me to remove it for longer trips and on nice weather days. Continue reading →
Like a lot of people, when I’m at work I like to keep busy. It makes me feel good about myself and the bonus is that the day just flies on by. Having said that, it’s also nice to escape from the walls of my office now and then and head out into the shop to see what the guys are working on. For some reason, this gravitational pull I feel from the shop occurs more when my boss is away. We can just call it an unexplained phenomenon and leave it at that. During some of my excursions to the shop rather than just observing they let me help them with the projects they’re working on, which I absolutely love! Continue reading →
Strings, as unique as the man who designed it, continues to be a work in progress for us at GBI. In Jan Gougeon’s first year of sailing Strings, he noticed the boat felt sticky at times. He thought it might be the centerboards jibing too much and the solution might be locking them straight. The center boards work as jibing boards by having two high spots on each side of a centerboard head creating the pivot point to get the boards to change angle, or jibe. The actual pressure from the boat going through the water and wanting to slide sideways gets the boards to jibe. Continue reading →
By The Students of Goshen High School’s Engineering Design & Development Class
We are a group of students from Goshen High School in northern Indiana and for the past six years we’ve had the opportunity to design, build and test high mileage prototype vehicles in a class called Engineering Design and Development. Year to year this program serves about 30 students aged 15 to 18. We begin with little to no background in an automotive or engineering technology background, and through the course of this program learn many new skills. Continue reading →