Monthly Archives: March 2023

Building a Soaking Tub

By James Thomas

After a long time in the planning stage, my son Adam and I began work on a tiny house in 2022. While it was possible to purchase small, modular shower pans and enclosures, small soaking tubs were virtually impossible to find. I’ve built several small boats using wood and WEST SYSTEM® Epoxy, so it occurred to me that building a small tub might be possible.

Continue reading

Readers’ Projects, Issue 56

Craig Bjarnason built an 8dinghy. It is a cold molded, cedar hull with mahogany keelson seats and transom. All the laminating was done with thickened WEST SYSTEM® Epoxy. The hull was sheathed with 6 oz. fiberglass/epoxy on the outside and was epoxy coated on the inside. This boat is used as a tender for our 34cold molded cutter on Lake of the Woods (Kenora, Ontario). It was also built using WEST SYSTEM Epoxy.

Take a look at some of the other awesome Readers’ Projects our fans sent in!

Continue reading

Bond Girl’s New Custom Rudder Support

By Jenessa Hilger – GBI Marketing

The weekend before our wedding, my husband and I bought our S2 7.9 meter sailboat. She was exactly what we were looking for, a trailerable racer/cruiser that was a diamond in the rough. Over the past nine years, we’ve made many improvements, the latest of which was building a custom fiberglass and carbon fiber rudder support, or as I nicknamed it, a rudder hook. Read on to see how (and why) we made it.

Continue reading

Calculating Laminate Thickness

By Rachael Geerts – GBI Composite Materials Engineer

Have you ever wondered how laminate thickness can be determined without breaking out the epoxy and reinforcement fabric? The answer is simple—use math. While some of you may have just lost interest because you think math is too difficult, I can assure you that this math requires nothing more than some basic multiplication, addition, and division. Let’s get to it.

Continue reading

RV Wall Replacement

Winnebago RV Wall Replacement

By Matthew Logering

When we purchased our 2006 Winnebago® RV, we knew we would need to complete some repairs. We never imagined the back wall would need to be removed and rebuilt from the ground up. One of the edges of the back wall was compromised which allowed water to penetrate the wall and eventually saturate a majority of the plywood within. After determining that the damage was too great to spot treat/repair, we began the process of removing the wall.

Continue reading

Preparing to Fair

Most of the rudder has been shaded with a pencil, so after longboarding, you can ssee the fairness of the entire surface.

By Greg Bull – GBI Technical Advisor

Those new to the process of fairing a boat’s hull or deck are quick to mix up a batch of fairing compound, WEST SYSTEM® Epoxy with a low-density filler, and apply it to the surface, so they can start sanding right away. My experience in boat repair and construction has taught me the importance of making a fairing plan and selecting the correct materials before any epoxy is mixed.

Continue reading