This stand-up paddleboard, commonly called a SUP, was lovingly handcrafted by Joe Pakkala. His attention to detail is impressive in the herringbone inlays and the non-skid foot pads incorporated into the epoxy’s finish. As opposed to traditional adhesive non-skid pads, incorporating the nonskid into the epoxy allows you to have a safe place to stand without covering the beauty of a natural wood finish.
Tag Archives: 38
The 37th Annual Wooden Boat Festival
By Bruce Niederer — GBI Technical Advisor
If you are interested in US Maritime history and heritage, you owe it to yourself to visit Port Townsend, Washington. Port Townsend is located 56 miles NNW from Seattle and sits on the waterfront of Port Townsend Bay in Puget Sound. This unique village is known for its sense of community and a lifestyle of “salt water hippies” focused on boats and the sea. Port Townsend is also the home of the oldest and largest Wooden Boat Festival in the Pacific Northwest, perhaps in the US. Truly an international event, Continue reading
Composites Merit Badge
By Mike Barnard
In 2006, Boy Scouts of America created a merit badge for composite materials, and I am now a merit badge counselor for this. Scouts who are interested learning about composites to earn this will badge contact. As an Eagle Scout, I understand the work ethic and dedication each Boy Scout must have in order to achieve the Eagle Scout rank. Continue reading
Fairing the Bottom of Adagio
By Greg Bull — GBI Technical Advisor
While fairing the bottom of your boat may seem beyond your reach, it is a project that novices and experienced boaters alike can accomplish with a few simple tools and a love of a little manual labor. Most seasoned sailors would agree that a clean bottom leads to faster sailing. Sometimes it may be necessary to do more than scrub away the algae and zebra mussels, though. In the case of Adagio, 44 years of sailing was starting to ripple the bottom of the boat. Simply put, it was time to fair the bottom. Continue reading
Repairing an Edison Concert Phonograph
By Tom Pawlak — GBI Technical Advisor
Ronnie Janowicz, a good friend of mine, called to say the wooden horn on his antique Edison Concert phonograph was cracked. I had Ronnie bring it by so I could take a look.
I told him it could be repaired very nicely with epoxy if that is what he wanted to do. “Why wouldn’t I want it repaired that way?” he asked. I explained that repairing an antique with epoxy may affect its resale value if the potential purchaser objects to the repair. Some collectors take a dim view of wooden antiques being repaired with epoxy because repairs are not easily reversible like they would be if hide glue was used for repair instead.
The Norway Boat
By Gene Steely
This is the story of the Norway boat, a 20′ sailboat manufactured in Norway in 1956 by the Ejvinds Company. This boat sailed from Iceland to the east coast of Canada, then down to Miami. From Miami, it sailed south to St. Croix and the Virgin Islands. After a few years in St. Croix it was brought to the Florida Keys 1967 and had two or three different owners. I purchased the Norway boat in the Florida Keys in 2003 and brought it to my home in Murray, Kentucky for restoration. Continue reading
Common Errors in Fiberglass Laminate Repair
By Jeff Wright — Vice President of Technical Services
While most of our customers are successful when using WEST SYSTEM Epoxy to repair a damaged fiberglass laminate, we have become familiar with some common errors that are easily preventable. These mistakes are made by both professionals and amateurs. The information discussed in this article is available in our Fiberglass Boat Repair Manual and WEST SYSTEM User Manual, and on the WEST SYSTEM website. Continue reading
Building the Dream
By Laura and Philip Harvey
We started building our dream boat, a DH550 55′ catamaran we christened Wild Vanilla. Our catamaran was built on a piece of land just behind Budget Marine in Trinidad, during a break in our long-term family cruise. Before we began, we had sold our boat building company, Harvey yachts in Cape Town South Africa, and set off on our 38-foot cruising cat. Onboard were our nine-month-old son and our cat, Velcro. Continue reading
Great Lakes Boatbuilding School
Keeping Our Maritime Heritage Alive
By Bruce Niederer — GBI Technical Advisor
On November 27, 2006, ground was broken on a perfect waterfront site overlooking the Les Cheneaux islands in Cedarville, Michigan in a ceremony that marked the end of a two-year fundraising effort and the beginning of The Great Lakes Boatbuilding School.
Wooden Goblet Rx
By Tom Pawlak — Retired GBI Technical Advisor
Vern, a good friend of mine, turned the exterior of a wooden goblet made from a nice piece of spalted sycamore. Unfortunately, the blank was not as dry as he thought and it cracked along one edge as it sat uncovered on his lathe overnight. He called to see if there was anything available for gluing it back together. I said I had some ideas and asked him to drop it off at work so I could take a stab at the repair. Continue reading