Tag Archives: #5 Winter 1995

oak

Using Epoxy with Oak

Editor’s Note:

This article about epoxy and oak was originally published in early 1995, and is shared at Epoxyworks.com for historical purposes. A dozen years after this article was written, we developed G/flex epoxies, which are rubber toughened to withstand shock, vibration, expansion and contraction. G/flex epoxies adhere tenaciously to many difficult to bond substrates, including dense and oily wood species like oak.  Continue reading

Patching Cracks in Concrete Blocks

by Brian Knight—GBI Technical Advisor

Someone I know patched the cracks in the concrete block walls of her house using a different technique than the one I described in Repairing Cracks in Concrete. When it rained hard, her basement took on a lot of water through cracks in the walls. The cracks ranged in size from 1/16″ wide to some so large she could see daylight through them. Since concrete blocks are hollow, injecting WEST SYSTEM® Epoxy into the cracks would be unacceptable. So she decided to fill the cracks using epoxy thickened to a mortar-like consistency. Continue reading