By Greg Bull — GBI Technical Advisor
Hog Tide’s deck was spongy around the chainplates, so I decided to fix the core in the deck. Because the main bulkhead was being replaced, it made it easier to do the deck repair from the underside. I started by removing the inner laminate to get to the bad core. I determined the extent of the bad core by tapping on the laminate; a duller sound suggests deteriorated core. Another way of determining if the core is bad is to drill small holes to see where the bad core is by noticing if the balsa core is a dark color. Water may even drip from the drilled holes. To cut the inner laminate I used a high-speed oscillating cutter with a diamond grit blade (multitool). When cutting out the inner laminate, keep the area that is being opened up as small as possible. You can always make more cuts to make the area larger. Continue reading