Tag Archives: Epoxyworks #16

Gluing Plastic Dimensional Lumber

by Patrick Ropp—GBI Technical Advisor

More people are using recycled plastic/wood composite lumber for decks and other various projects. Although each manufacturer of recycled plastic lumber has his own blend, we found that most are using very similar ingredients: an equal amount of melted recycled plastic mixed with recycled wood chips or sawdust and then extruded in the form of dimensional lumber. Since the wood is encased in plastic, the plastic/wood composite boards are supposed to last longer than traditional decking materials and carry a good warranty. Many of these boards are not intended for use as structural members, but they Continue reading →

Garbage Disposal Repair with Epoxy

By Bruce Niederer — GBI Technical Advisor

If your kids are like mine, they manage to break stuff you didn’t even think could be broken—constantly. As parents, we can either get inventive at repairing things we know little or nothing about, or we can get second jobs and pay someone else to fix everything. I like the first option better. Continue reading →

Fiberglassing a Woodstrip Hull

By Ted Moores

The WEST SYSTEM User Manual describes the basics of fiberglass cloth application and coating for clear finishing over wood. This article is the ultimate guide to applying fiberglass over a woodstrip hull to achieve a perfect finish. Ted Moores is a master of the perfect finish, author of CanoeCraft and KayakCraft and co-owner of Bear Mountain Boats. Continue reading →

Bear Mountain Boats

Bear Mountain Boat Shop, owned by partners Ted Moores and Joan Barrett, is well known for pioneering effective methods of woodstrip epoxy small boat construction and for sharing that expertise with amateur builders around the world. CanoeCraft and KayakCraft, written by Ted Moores, have encouraged thousands to build light weight wooden craft with professional results while using the most advanced materials available. Ted’s fascination with canoes and heritage craft began in 1972. Since that time, the company has built and restored numerous boats from mahogany runabouts to the fastest sprint racing canoes on the market. Continue reading →

Cruiser

Readers’ Projects, Issue 16

Eric Molsted’s 26′ cruiser

Eric Molsted of Sisters, Oregon recently completed and launched this 26′ cruiser. The hull is strip-planked 1″ x 7/16″ hemlock, fiberglass inside and out. Eric used WEST SYSTEM Epoxy throughout. With a 25 HP outboard, this cruiser will do 14 knots. He hopes to scale the boat to 31′ or 36 ‘ with an inboard engine someday. Continue reading →