Cover Photo: One of LADY B’s first sails on the Saginaw River near the Gougeon Brothers boat shop.
Lady B is a sailing sharpie I launched on August 20, 2009. On one of the first sails, I asked Jan Gougeon to come along with me to see what he thought of her. That sail brought back many memorable sailing moments that Jan and I have shared over our lifetimes. Jan Gougeon grew up on Donahue Beach and I on nearby Aplin Beach. The two beaches were separated by Wenona Beach, a magnificent amusement park built at the turn of the century. We were in the same kindergarten class. It wasn’t long before we were both in boats we’d built: Jan in his 13′ Dart and I in my 8′ pram, the Pal. Back in those days we built using bedding compound and lots of screws. We carried coffee cans to bail our leaky boats. Around 1955, Continue reading →
Almost 40 years ago Meade and Jan Gougeon opened their doors to a fastener-less method of boat construction using epoxy and various clamping methods. Jan’s newest boat is in the home stretch to completion, and he is addressing the fine tweaks of coaming and fairing. Continue reading →
I don’t know about you, but I have problems finding wastebaskets that fit the spaces I have in mind. The baskets are either way too small or a bit too large for the opening. It happened at a previous house we lived in and it happened again in our current home. My solution was to make my own baskets with 4 to 6mm (3 16″ to 1 4″ thick) plywood sealed with and glued together with WEST SYSTEM® Epoxy. Continue reading →
The cover of Epoxyworks 16 shows Serendipity, the sailing canoe I built for Meade Gougeon on a Bell “Starfire” hull after he had seen me sailing my Starfire-based Puffin in the summer of 1998. The Starfire hull was designed by Dave Yost.
Sitting at the lunch table in the Gougeon’s boat shop in 2001, Meade said he was thinking of building a few Serendipity sisters and asked me if I’d like one too. I said no because Continue reading →
If you look closely at some of the photos in the Bufflehead article, you will notice small eye pads (also called pad eyes) in strategic locations inside and outside of Hugh Horton’s Bufflehead. Hugh makes this lightweight carbon fiber or Twaron™ reinforced nylon line eye pads for his sailing canoes.
He glues them onto the decks or inside his sailing canoes—wherever they’re needed to hold supplies in place or hold flotation inside the hull. The eye pads are easy to make and amazingly strong. Continue reading →
My personal boat is a 1986 Formula 242 LS.With a soft riding deep V hull, good performance and a small but well appointed cuddy cabin, it is a great boat for me, my wife and our dog to use for a whole weekend. One shortcoming, besides not having standing headroom in the cabin, is the built-in cooler located in the cuddy cabin. The cooler had a side door and was styled to look like a refrigerator. This may have looked “cool” in the mid 1980s but was impractical. We couldn’t put ice in the cooler without having the water leak out through the door. For any trip longer than one night I had to use a standard cooler strapped to the swim platform. This was inconvenient and limited the use of the platform at the beach. Continue reading →
Stephens, Waring & White Yacht Design of Brooklin, Maine, designed Zogo to meet their clients’ concern for treading lightly on their environment. Her owners are longtime summer residents of Stonington, Maine who enjoy low-impact kayaking and rowing around the pristine islands of Merchants Row. They wanted a quiet powerboat with a low carbon footprint to reflect their respect for the waters around Stonington. Continue reading →
This repair method is tailored to fixing individual gel coat blisters prior to bottom painting. The advantage of this method is it can repair blisters on hulls recently pulled from the water or hulls that have been out for some time. Continue reading →
Students of the Northwest School of Wooden Boat Building in Port Townsend, Washington, recently built the Caledonia Yawl, an Ian Oughtred design. The boat was commissioned by the Four Winds Camp on Orcas Island in Puget Sound and is the second one the school has built for them. Instructor Bruce Batchely believes this is the best built boat to come out of the shop so far. They modified the boat to suit the camp’s need for buoyancy and storage, and made the spars hollow to keep the rig light. Continue reading →