Every now and then it is good to look back at a project to see how it has held up over several years. Above is a photo of the western red cedar fence I built in the summer of 1998 (as it looks today) and below, the fence as it looked during and just after construction five years ago. This fence uses no nails, screws, bolts, etc. to hold it together. Only WEST SYSTEM® epoxy holds the spindles to the rails and the rails to the posts. Continue reading →
The finished fence, of rot resistant cedar, is built by gluing pieces together instead of nailing.
By Brian Knight
Rot is one of the major disadvantages of a wooden fence. Wherever there is a fastener—nail, staple or screw—there is a potential site for rot to begin. Water gets around each fastener and soaks into the wood. When the temperature and the moisture content are right, rot invades these areas. To make a fence that would not rot quickly, I used a rot resistant wood and eliminated fasteners, gluing pieces together instead of nailing. Not only was the process fast—I could assemble 42′ of fence a day—but warps and twists in the fence material were easily dealt with. Continue reading →