Tag Archives: patti meter

adhesion testing equipment

Will It Stick?

Epoxy Adhesion Testing with NewWood and Granite

By Mike Barnard

Many times each day we get questions about epoxy sticking to various substrates. Most questions are about something that we have already tested, so we check our large database and advise on how best to adhere to the surface in question. Other times, the request is unique and we are unsure if WEST SYSTEM® Epoxy will stick to it or not. In the event we do not have any experience bonding to a material, we recommend testing the adhesion. Many times, this means gluing a wood block to the surface, then pulling the block off once the epoxy is cured.  The test method we use is much more quantitative than that because it measures how much force it takes to remove the epoxy. Continue reading →

epoxy testing is performed in the GBI lab

Testing, Testing, 123

by Julie Jezowski

Above: the state-of-the-art lab where Gougeon chemists perform much of the company’s epoxy testing.

By now most of you know that we are the manufacturers of WEST SYSTEM® Epoxy. But you may not know what is involved in the manufacturing and more specifically, the formulating of WEST SYSTEM. It’s not just slapping some chemicals together and then packaging it up into a pretty box. To date, we have performed thousands of tests and generated thousands of test results. Continue reading →

A great tool when you want to prepare fiberglass laminates for epoxy adhesion

A Better Way to Prepare Fiberglass Laminates

by Tom Pawlak — GBI Technical Advisor

Above: The Rapid Strip Brush™ is a great tool when you want to prepare fiberglass laminates for epoxy adhesion.

During a recent inspirational hardware store visit, I discovered a rotary wire brush made by Norton™ called the Rapid Strip Brush™. It is used with an electric drill and produces results comparable to bead blasting or a needle scaler. The package says it can be used to abrade metal, masonry, and fiberglass. I immediately thought of a fiberglass application that I wanted to try it on. Continue reading →

Testing DCPD Blend Laminates

By Tom Pawlak — GBI Technical Advisor

Above: A DCPD blend laminate repaired with WEST SYSTEM Epoxy is tested to failure. The laminate required gross deformation before it failed, meaning epoxy is an appropriate repair material for the type of laminates common on jet skis and snowmobiles.

Gougeon Brothers recently did R&D testing on DCPD blend laminates for a manufacturer who wanted to know if WEST SYSTEM® Epoxy could effectively repair them. DCPD blend laminates are injection-molded parts made with fiberglass and dicyclopentadiene (DCPD) blended polyester resin that included an internal mold release agent. The hoods and decks for many jet skis and snowmobiles are made with this material.

Continue reading →

Gluing Plastic Dimensional Lumber

by Patrick Ropp—GBI Technical Advisor

More people are using recycled plastic/wood composite lumber for decks and other various projects. Although each manufacturer of recycled plastic lumber has his own blend, we found that most are using very similar ingredients: an equal amount of melted recycled plastic mixed with recycled wood chips or sawdust and then extruded in the form of dimensional lumber. Since the wood is encased in plastic, the plastic/wood composite boards are supposed to last longer than traditional decking materials and carry a good warranty. Many of these boards are not intended for use as structural members, but they Continue reading →