A local sailor stopped by our shop with an old plastic hatch that was slightly warped and badly cracked. He hadn’t been able to find a similar hatch to replace it. He wondered if we had an epoxy that could be used to repair the hatch. I said G/flex would likely work but to know for sure we needed to do a bit of adhesion testing. Continue reading →
Above: This joint style in an edge-glued, 1/8″ thick HDPE plastic strip which holds tight when deflected and is a good choice when gluing plastics.
One of our goals for G/flex® was the ability to bond to a variety of plastics. This was an ambitious goal because plastics historically have been used as mold release surfaces for epoxy, allowing the epoxy to release from the plastic when cured. While developing G/flex, we tested adhesion to a number of plastics with a variety of surface prep methods. Continue reading →
If your kids are like mine, they manage to break stuff you didn’t even think could be broken—constantly. As parents, we can either get inventive at repairing things we know little or nothing about, or we can get second jobs and pay someone else to fix everything. I like the first option better. Continue reading →