Tag Archives: prevent adhesion

What you can do if you don’t want epoxy to stick

By Bruce Niederer — GBI Technical Advisor

We spend a good amount of time doing everything we can to inform our customers how best to make WEST SYSTEM® epoxy stick to wood, metal, and even plastic, or underwater with the introduction of  G/flex 650 and 655.  Still, there are many instances when you don’t want the epoxy to stick to one surface or another. This is where mold release agents come in very handy.

Continue reading

Mold Release, PVA and Hairspray

By Tom Pawlak — GBI Technical Advisor

PVA (polyvinyl alcohol) is a water-based liquid plastic that can be applied to waxed molds to prevent molded parts from sticking. PVA is not always required. Often laminators rely solely on mold release wax to create a surface contaminant on the mold that allows parts to be removed. However, on complicated molds and on new molds, when the risk of sticking a part in a mold is greatest, PVA can be applied over a waxed mold to minimize the chance of sticking a part. Continue reading