It all started when I got a tech call from somebody asking if WEST SYSTEM® 105/206 would accept a nail pounded in, after it was cured, with no pilot hole. I confidently said that it would not work well and in most cases cause a fracture in the epoxy. Just for fun, I went out in the shop and tried it because even though every tech advisor agreed it wouldn’t work, nobody had ever actually done it. Well, we were right—the nail caused a “brittle” failure.
Then I saw a 1/8″ thick piece of cured G/flex 650 epoxy sitting on my work bench that I had Continue reading →
WEST SYSTEM 105 Resin-based epoxy is a very versatile system. For years, experienced users have been blending the various products in countless ways. For example, users may blend 205 Fast Hardener and 206 Slow Hardener to make a hardener with a modified cure speed. Different uses of 410 Microlight® Filler provide a further example. Many customers assume that the only use of 410 is to make a fairing compound—it is added to thicken epoxy to a peanut butter consistency to create a light, easily-sanded filler. However, 410 Microlight can be used in other ways. Jon Staudacher in Epoxyworks 22 described how he applied a “runny” mixture of epoxy and 410 to fill the weave on a composite part and reduce the Continue reading →
Planer boards allow for more fishing lines to be trolled simultaneously and are used to spread lures and harnesses away from the boat when trolling at low speeds (below 2 knots). They are commonly used when fishing for walleye. You can achieve a greater dimensional spread with planer boards than with outriggers. Continue reading →
Keith Tucker creates sculptures on a large scale. Most of his pieces are created for corporate events and the theater. Tucker glues together large blocks of 2 lb weight polystyrene. Tucker says it’s quite dense and retains detail well. Continue reading →