Tag Archives: Bill Bauer

1957 MG 15 Fiberglass Runabout with original mahogany transom.

The Restoration of a 1957 Fiberglass Runabout

by Bill Bauer

I acquired this 1957 MFG 15 fiberglass runabout with its original mahogany transom in 2017. The previous owner had started to restore it but did not finish. When I first got the boat it was just a hull and a bunch of parts. A neighbor, Kami, and I work on it on weekends at Black River Boat Shop when we both are available. Continue reading

gaff repair on Appledore IV and V

Gaff Repair

By Bill Bauer

In preparation for a thorough Coast Guard inspection, we’d stripped the masts, booms, and gaffs on the schooners Appledore IV and V of paint and varnish. This revealed several small rot areas, wear, and damage. Two of the gaff jaws (also called gaff saddles) had significant damage, including cracks in the jaws themselves, probably due to hard jibes and insufficient repairs. Gaffs are the angled spars from which the sails are hung. Continue reading

Flying Dutchman Repair

By Bill Bauer

On July 15th, 2006, a friend and I took my 1958 Flying Dutchman out for a sail in the Saginaw River. This was only the third time the boat had sailed in 30 years and the first hard sailing since my six-year-long restoration. We set both sails and made several runs in front of the Saginaw Bay Yacht Club before we hit something, maybe an old piling or maybe the freighter rudder that went missing the previous fall.

The Damage
The centerboard took the first impact, splitting at the pivot bolt hole. Next the rudder hit, forcing it upward, snapping the tiller and tearing off most of the transom. The board jammed against the back of the centerboard trunk and gouged a triangle out of the trailing edge of the centerboard. Continue reading