GET STARTED
FREE PRINT & DIGITAL EDITIONS
Explore the latest Fairing articles
By Greg Bull – GBI Technical Advisor Those new to the process of fairing a boat’s hull or deck are quick to mix up a batch of fairing compound, WEST SYSTEM® Epoxy with a low-density filler, and apply it to the surface, so they can start sanding right away. My experience in boat repair and […]
By Tom Pawlak — GBI Technical Advisor About 30 years ago, I built an 18′ wood strip canoe. At the time, my family was young and I could only work on it intermittently. Over the course of six months, I had faired my mold frames, applied the redwood strips, faired the outside of the hull […]
Creating a smooth surface with epoxy fairing compounds By Jeff Wright — Vice President of Technical Services An epoxy fairing compound should be of a consistency that can be troweled onto a surface without sagging. Add 407 Low Density or 410 Microlight filler to mixed epoxy, checking the consistency as you stir in the filler […]
By Greg Bull — GBI Technical Advisor While fairing the bottom of your boat may seem beyond your reach, it is a project that novices and experienced boaters alike can accomplish with a few simple tools and a love of a little manual labor. Most seasoned sailors would agree that a clean bottom leads to […]
By Damian McLaughlin All of the boat builders that I know have little sanding tricks that make a job go faster or do it better. Fairing a 40′ custom-built hull is an arduous task that is often accomplished with two-man teams and fairing boards. We do 90% of the work with a grinding device. Almost […]
